How to Remove Rear Bike Wheel with No Quick Release?
This page contains affiliate links for products I use and love. If you take action (i.e. subscribe, make a purchase) after clicking a link, I may earn some tea 🫖 money, which I promise to drink while creating more helpful content like this.
How to Remove Rear Bike Wheel with No Quick Release? Most riders are familiar with removing their rear bike wheel. However, there are situations when you need to change a flat tyre, put it inside your car, or perform a routine maintenance check. With a quick-release system, it is now a simple process that does not require the use of any equipment.
But what if your bicycle lacks a quick-release system? So, here are some other methods for learning how to remove a rear bike wheel with no quick release. It is possible to accomplish this by properly prepping your bike, disengaging the brakes and derailleur gear, and releasing the bolts. The bike wheel may then be carefully removed from the frame. Continue reading our article to learn how to do those steps better and more clearly.
This Bikehand Tool Kit comes with a range of most common bike tools. It is very easy to use for regular bike service, such as cleaning chain, changing tire, changing bottom bracket, adjust shifter and brake cables.
What exactly is a Quick-Release Mechanism?
Firstly, let’s understand a quick-release system and how it works on a bike.
A quick-release system is a simple and effective method for releasing a wheel from a bike frame. It uses a cam system which allows bike wheels to be swiftly removed without the use of a tool. Furthermore, it is simple to use and will never make removing your wheel difficult.
But, without a quick-release, will it be more difficult to remove your bike?
Removing a rear bike wheel without a quick-release is not difficult. It is still possible to remove a wheel without using a quick-release. You only need to follow these five simple steps:
- Get your bike ready.
- Remove the brakes and derailleur gear.
- Using a spanner, work on the nuts and loosen them.
- Remove the rear bike wheel with care.
- Remove the derailleur chain entirely and elevate your bike off the ground.
Get your bike ready.
The first, and most crucial, step in removing the rear bike wheel without using a quick release is to prepare. If you have a bike repair stand, you should use it to keep the bike steady while working on it. If you don’t have a stand, you can lay your bike down.
The location of your bike is important not just for ease but also for a correct angle while removing your rear bike wheel. So, I believe it is preferable to utilise a bike repair stand when performing this task.
Remove the brakes and derailleur gear.
Second, check to see if your bike has cantilever (rim) brakes or disc brakes. All you have to do if your bike has rim brakes is open the breaks. You must use extreme caution while using disc brakes to avoid tipping your bike over. The back wheel will come out with this type of brake, but it will bend since disc brakes hold your bike wheel more securely than rim brakes.
Work on the derailleur gear next. When removing a wheel, most bikes have derailleur gear that must be disengaged. To complete this process, choose the smallest combo of ‘sprockets’ and move the pedals while awaiting for the chain to fall to the ground. When the chain came apart, the bolts that held your back bike wheel exposed themselves.
This step is critical because it will provide you with a clearer view of the nuts you need to loosen. Your rear wheel will remain attached to the bike frame or body if the bolts are not loosened.
Using a spanner, work on the nuts and loosen them.
It’s time to loosen the nuts now that they’re completely accessible to you. Normally, your bike wheel comes with 15mm nuts on both ends. To remove your wheel from the bike frame, you must first loosen those nuts.
To release the nuts in this stage, you’ll need a tool. Keep in mind that the tool you want must fit exactly 15mm nuts. Look for a wrench or spanner that can completely round a 15mm nut.
After you’ve found a suitable spanner, check the location of the washers before rotating the nuts to the necessary degree. Check to see whether the nut is moving, and if so, gently move it in the direction that it will be unscrewed. Following that, loosen the opposing nut as well.
Remove the rear bike wheel with care.
You may now stand behind the bike with your head on the center-line when the nut has been completely loosened and released. It will provide you with a better angle of the wheel before you remove it. The wheel is not completely removed from the bike at this procedure.
By gripping the left side of the bike while your right thumb secures the end of the nut on the other side, you must gradually remove the bike frame from the wheel. While removing the derailleur body fully off the wheel, your left hand should provide support.
Remove the derailleur chain entirely and elevate your bike off the ground.
You may now raise the body of your bike while the wheel remains on the ground once the derailleur has rotated out from beneath the rear wheel. In this stage, you’ll observe that the wheel has already split from the bike’s frame, but the chain hasn’t been entirely removed. With your right hand, totally detach the chain and raise the bike body with your left.
The rear wheel has now been completely removed from the bike after being lifted. After that, hang your bike up and check the back wheel you removed. You’ve already removed the back wheel from your bike at this stage.